SV20 Air – Up to 100m²


The SolarVenti SV20 air collector for 100 m2 space and may be mounted horizontal on the roof or wall – or vertical on the wall.  It heats ca. 80-140 m3 in blown air per hour up to 30K at full solar radiation.

Solarventi SV20 comes complete with accessories and kit ready for mounting on a wall.

The Panel filter is maintenance-free.


Recommended max area of the house in m²: 100 m² ( 119 yd² square yards )

Maximum air flow – m3/h:  140 m3 ( 183 yd3 cubic yards )

Complete replacement of the air in the room: In less than 2 hours

Utilization of solar radiation (Efficiency): 67%

Estimated avarage energy production kWh/m² per year *: 670 kWh

Estimated energy production kWh/SV-unit/year *: 1340 kWh

Rise in temperature compared to outdoor temperature: Approx. 30o degrees K  (e.g. from 10o  C to 40o C)

Dimension (panel) in mm: L. x W. x D., excl. package: 1974 x 1004 x 55 mm (77.71″ x 27.71″ x 2.16″)

Dimension (panel) in mm: L. x W. x D., incl. package: 2170 x 1040 x 150 mm (85.43″ x 39.52″ x 5.9″)

Dimension (roof mountingh kit) in mm: L. x W. x D., incl. package: 1080 x 260 x 220 mm (42.52″ x 10.24″ x 10.23″)

Panel size in m²: 2 m² (  2.4 yd² )

Solar cell – watts / power generation: 12 watt

Ventilator – watts / power consumption: 3.4 watt

Weight (panel) – kg, excl. package: 15 kg. ( 33 Lb )

Weight (panel) – kg, incl. package: 21 kg. ( 46 Lb)

Weight (roof mounting kit) – kg, incl. package: 7 kg ( 15.43 Lb)

Maintenance free (number of years): Up to 15 years

Product warranty: 5 years

Framework (Material): Aluminum (seawater resistant)

Air outlet on collector – Dimensions in mm: 125 mm ( 4.92″ )

Cover plate (transparent): Polycarbonate

Indoor inlet valve in the house: 125 mm ( 4.92″ )

Humidity stopp – to prevent condensation water and back drafts: Yes

Tube for wall mounting, screws etc.: Yes

Cooling and extraction kit with extra solar cell: Yes

Roof mounting kit, type 1, for tile etc.: Yes

Roof mounting kit, type 2 for steel plate roof etc.: Yes

Basement mounting kit: Yes